Land clearing
1. Land clearing:
- Do not ever get pushed honeycomb.
- Do not push the tree that had rotted, dried branches are easily broken at the top. when confronted with this kind of thing should be cut only with enchinsaw.
- Watch out for that tree leaning against another cult / not completely overthrown and always be aware of the concerns at the root of the tractor.
2. Areas such as slope / steep cliff that could endanger the operator and tool
dioperasika, and supervisory experience in the job field land
clearing needs to be improved because of the accident caused by hazards
The above and many other hazards unexpected.
a. Clean the grove.
- Tall shrubs and trees of medium size, the point of tangency with the tree trunk
performed at a height of 12-16 inc (300-400 cm) above the soil surface while
lift the blade moving forward.
cleaning shrub; press enter blade several inches into the ground, then push and lift the blade when the shrubs are uprooted in order to clean the soil from the roots.
- Cleaning embankment; lift blade when pushed.
b. Cleaning a tree.
1. Get rid of dead branches, cut the roots at opposite positions
with the direction of the fall of the tree.
2. Cut the roots on the two sides parallel to the fall of the tree.
3. Slowly advance the tractor towards the blade touched the tree up,
blade held high with the push towards the fallen tree
desired. when the point of contact between the blade make the tree pile soil
tractor to grind.
- Do not ever get pushed honeycomb.
- Do not push the tree that had rotted, dried branches are easily broken at the top. when confronted with this kind of thing should be cut only with enchinsaw.
- Watch out for that tree leaning against another cult / not completely overthrown and always be aware of the concerns at the root of the tractor.
2. Areas such as slope / steep cliff that could endanger the operator and tool
dioperasika, and supervisory experience in the job field land
clearing needs to be improved because of the accident caused by hazards
The above and many other hazards unexpected.
- Tall shrubs and trees of medium size, the point of tangency with the tree trunk
performed at a height of 12-16 inc (300-400 cm) above the soil surface while
lift the blade moving forward.
1. Get rid of dead branches, cut the roots at opposite positions
with the direction of the fall of the tree.
blade held high with the push towards the fallen tree
desired. when the point of contact between the blade make the tree pile soil
tractor to grind.
0 opmerkings:
Plaas 'n opmerking